The Scissor Stabilizer Jacks w/ Handle item # TJSCHD-24-4 would work great with both your Micro Minnie and the SnapPad SnapJack SJ RV Scissor Jack Pads item # SN32FR you purchased. These have a 10,000 lbs total capacity and expand from 5" to 23-3/4".
I have linked a review video below so you can see them demonstrated. view full answer...
Hey there Robert, thanks for the question and there is a pad that will work for the Lippert Scissor Stabilizer Jacks # LC285326.
What you can use are the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR. view full answer...
Hey Betty, so to pick out the correct SnapPad for your fifth wheel will be based on the size and shape of the foot pads of the trailer jacks. I don't have a way to determine what your RV has so you'll need to measure your foot pads and then check out the attached link to see all of the options we have where you will need to select your foot pad size. view full answer...
While I have no way to see exactly what leveling system you have on your 2006 Tiffin Phaeton 35DH, I was able to find information on a forum showing someone who did confirm the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet # SN58FR were the correct ones for his. You can verify this by first ensuring you have either a HWH or Atwood leveling systems and the jack pads are 10" in diameter. I ask that you verify as RV manufacturers often switch parts throughout... view full answer...
Thanks for reaching out, Mark!
The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs # TJSCHD-24-4 are designed with 11 Gauge steel and install using 1/4" self-tapping screws like the Self-Tapping Screw # FA1131822.
Then for base pads you just need two kits of the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR and you'll be good to go! view full answer...
I believe you are looking for the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4. This will contain 4 pads or we have them individually as Replacements # SP54FR since you only mentioned the rear jacks. view full answer...
Hi Jean,
If our fitguide doesn't have a listing yet then we just haven't had confirmation on the correct sizing yet. That being said, you can measure the diameter of your leveling system's footpads and take note of their shape and I can find the correct package of pads for your RV. I've attached a link to our SnapPad selection below where you can narrow down the by size, shape, and quantity. I recommend checking each footpad as some systems change shape and size from front to back. view full answer...
Hi Renato; I checked with SnapPad and they did not have a specific fit for your motorhome, and we don't have a way of knowing what size the feet are for your leveling system, so in order to get the right one you'll need to measure the size of your jack feet. For example, if you had a Power Gear leveling system and the jack feet were 10 inches in diameter you would use the SnapPad Prime Jack Pads for Power Gear Leveling Systems w/ 10" Round Concave Jack Feet # SP84FR4.
I have added a link... view full answer...
I believe what you're looking for is the:
-Replacement Lippert Level Up Hydraulic Jack - Silver # LC63ED.
This is the same as the Replacement Hydraulic Jack Assembly for Lippert Level Up System # LC36VR but is silver in color as opposed to black.
Both of these jacks have a weight capacity of 8,000lbs, a travel of 15" and a footpad diameter of 9".
A great upgrade to your 9" foot pads, is a set of the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4.
These... view full answer...
Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs. view full answer...
Yes, you will be able to install the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 on your 2022 Forest River Rockwood Mini Lite 2205S. I know you are going to be very happy with how easily this system levels your camper so you can start enjoying your journey.
I do recommend getting the SnapPad Jack Pads # SP54FR4 for a more solid base for the 4 leveling jacks. view full answer...
Hey Edgar, so the 30 inch scissor jacks part # JSC-30 when collapsed are overall 32-1/2 inches long and the 24 inch version part # e65NR are 26-1/2 inches. So from where they would mount they would stick out half those distances to either side.
So 30 inch would stick out 16-1/4 inches and the 24 inch would stick out 13-1/4 inches. view full answer...
Hi Phil,
If the brake calipers list Kodiak and 250 then the Kodiak Ceramic Brake Pads # K250CP would be a compatible replacement. The backing plate color doesn't matter in this case, and is really just for branding. Outer pad wear means the slides/pins are causing a bind and are just in need of cleaning and lubrication to freely move. The inner pads are just getting more pressure to clamp down on the rotor, giving you the uneven wear. It's not end of world concerning but I would definitely... view full answer...
The 30" Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR have a weld on design. This is the only way to install the jacks with the included mounts as there is not enough room between the stabilizer itself and the mounting plate for additional hardware.
We do have the shorter Stallion 22-1/4" Stabilizers # 288-01892-2 which do offer a bolt on installation if the length of the jack will work for your application. view full answer...
No, we do not. The closest comparable option we do have is the Lippert High-Speed Power Stabilizer Jack item # LC298707 you were looking at. view full answer...
Hi Mike; the Ark Drop Down Corner RV Stabilizer Jacks # ARK77FR can be used in three different positions. At 30° and 60° they act as non-rated stabilizers. At 90° they have the 1,929 lb rating. view full answer...
We do have the replacement pad for the Hollywood Racks RV Rider Bike Rack item # HLY64FR. It is the Replacement Rim Protector for Hollywood Racks TRS SE 2-Bike Rack item # HRTRS-RP-STP. I checked with Hollywood Racks it fits the Sport Rider E-Bike racks and the RV Rider racks as well. view full answer...
Hi Gary,
We currently only offer the female jack for Furrion Vision S camera systems packaged together with the mounting bracket # FRCBRKT-BL. You could try reaching out to Furrion directly and they'd likely send you a new one. view full answer...
We should certainly have the correct SnapPads for your 2011 Thor Hurricane 31G. Unfortunately the is no online database we can reference that will tell us exactly what size pads you will need based off of the year make and model of RV.
If you will take a quick measurement of the pads on your coach and let me know what shape and size they are I can recommend exactly what you will need for your application. These can range from 7"-12" and be square, round or octagonal. Sometimes the front... view full answer...
Hey Zach, so while what you mentioned wasn't the intended use for the Pro Series jack part # PS1400990376 there's no reason it couldn't be done as long as you know what you are doing. view full answer...